How To

How to Apply Gear Guards:

1. Clean the Surface

Use an isopropyl alcohol prep pad to thoroughly clean the surface of your headgear.

2. Dry Completely

Wipe the surface dry with a clean cloth or paper towel to ensure no moisture remains.

3. Warm the Surface

Apply gentle heat using a heat gun or hair dryer to slightly warm the headgear surface. This helps improve adhesive bonding.

4. Prepare the Gear Guard

Carefully remove the adhesive backing. Avoid touching the adhesive to keep it clean and effective.

5. Apply the Gear Guard

Align and press the Gear Guards onto the headgear, starting from the center and working your way toward the top and bottom.

6. Apply Pressure

Use your hands or a heavy object to press evenly around all edges for at least 2 minutes.

7. Set the Adhesive

Let the adhesive cure for 5 minutes before using the headgear.

Tips and Tricks (Optional but Recommended)

1. Pre-Shape the Gear Guards

To help the Gear Guards better conform to your headgear, gently roll it into a “taco” shape and place it in a standard tumbler or wide-mouth cup for up to 60 minutes. This helps the material retain a natural curve closer to your headgear.

2. Seal Edges with Heat

After applying the Gear Guards, use a hair dryer or heat gun to gently warm the edges. Then, press down firmly to help seal and secure them.

3. Apply Extended Pressure

For the most consistent bond, place a heavy object over the Gear Guards for at least 30 minutes. This helps ensure long-lasting adherence.